Step-by-step Instructions for Automatic Car Driver

While Automatic Car Driver may seem simple, there are a few things you must know to ensure that you drive safely and effectively. This comprehensive book will discuss everything you need to know about driving an automatic car, including the answers to the most common questions: 

How do I drive an automatic car? 

Adjust the seat and mirrors before starting the vehicle so that you have a comfortable seat position and good road visibility. You should press the brake pedal. Remember, most automated vehicles only allow the ignition to be activated when the brake is applied.

• Engage the right gear: To start driving, place the gear lever in D position.
• One-foot control: Use the right foot for acceleration and braking. 
• Do not use your left foot as in manual vehicles: avoid sudden acceleration. 
• Drive gently to avoid wear and tear and increase efficiency.

What is required to start the automatic vehicle?

To start an automatic vehicle, the transmission must be in N (neutral) or P (park) mode. These gears prevent the car from moving while starting. In most cars, the brake pedal is also pushed down so that the ignition system is activated.

Can you switch off the automatic car in D?

The gear stick should never be in the D position when shutting down the automatic car. This will compromise the electrical system of the vehicle and damage the transmission. Always put the gear stick in P (Park) position before the engine is switched off.

What is the letter L in automatic transmission?

The letter L (Low) indicates a low gear, which is used when the car is in situations requiring more engine power and lower speed, such as: steep hills;slippery descents (use of engine braking);driving over rough terrain, such as sand or mud

What is the letter S in Automatic Transmission?

The letter S (Sport) activates Sport mode, which sets the transmission to favour performance. In this mode, the car: stays in lower gears for faster acceleration;improves throttle response;is ideal for overtaking or in situations where the driver wants to make more power.In spite of the increased performance, S mode uses more fuel.

.

How can I switch on and off the automatic transmission?

To switch off the automatic transmission, check that the gearbox is in P (Park) or N (Stop) position.

To stop:To bring the vehicle to a full stop, press the brake button.

Hold the gear stick in D (drive) and keep your foot on the brake. This is the most common and most practical method. Alternatively, you can shift the transfer to N (neutral), but only if the light is on a long path. This reduces the load on the transmission system but may not be feasible for shortstops.

What is the sequence for turning off the automatic car?

The sequence for turning off the automatic car is:Bring the vehicle to a full stop by putting the gear-box in P (Park) position. 

To avoid unnecessary wear and tear and to drive safely, ensure that you understand the operation of the transmission and follow the instructions. With practice, the automatic transmission will become your best travel companion!

Bonus Tip!

If you are located in Glasgow and wish to join a driving instructor training programme, The school of Glasgow has been here for 35 years. The company has good reviews especially for the automatic driving lessons in Glasgow and its surrounding. Everyone can contact you by visiting the website.